光伏組件邊框與層壓好后的層壓件的裝配要求緊密配合,并且連接牢固,要具有很好的密封性,防止有破壞作用的液體和氣體進入。 接線盒與背板之間要有很好的粘接,即使長期使用在局部受力下也不脫落。 Js606是專為太陽能光伏組件鋁邊框和接線盒粘結要求而設計開發的中性固化有機硅密封膠,具有優異的粘接性能,極好的耐老化性,可有效的防止產生破壞作用的氣體和液體滲入。 The assemblage of PV modules frame and laminated pieces must be connected closely and reliably with good sealing function against liquids and gases corrosion. The Junction box and the back plates should have good adhesion and would not fall off even under stress partly in long time. Js606 is designed for the bonding of the solar PV module aluminum frame and the junction box. This product, neutral cured, has excellent adhesion, excellent aging resistance, and could prevent the penetration of gases and liquids effectively.
產品特性Features ? 優異的粘結性能,對專用鋁材、鋼化玻璃、復合背板、PPO等材料有良好的粘結性; ? 極佳的電器絕緣性和耐候性能,可在-40~200℃使用; ? 中性固化,對大多數材料無腐蝕性,耐臭氧和抗化學腐蝕性強; ? 通過雙“85”高溫高濕試驗,耐老化試驗,冷熱溫差沖擊試驗,具有耐黃變、耐環境腐蝕、耐機械沖擊和熱沖擊、防震等功能; ? 通過了TUV,SGS,UL,ISO9001/ISO14001認證。 Excellent bonding properties, good adhesion to the aluminum, glass, composite back plate, PPO and other materials. Excellent electrical insulation and weather resistance, could be used in -40 ~ 200 ℃ Neutral cured, non-corrosive to a lot of materials, resistant to ozone and resistant to chemical corrosion Passed the double "85" high temperature and humidity test, aging test, hot and cold temperature impact test Resistant to yellowing, environmental corrosion, mechanical shock, thermal shock, vibration and so on. Passed TUV, SGS, UL, ISO9001/ISO14001 Certification
All surfaces must be clean and dry. Degrease and wash off any contaminants that could impair adhesion. Suitable solvents include isopropyl alcohol, acetone, or methyl ethyl ketone. Not contact eyes with uncured sealant and wash by water once contaminated Avoid long time to exposure to skin
顏色及包裝 Available packing 常規顏色有黑色,白色,還可按照客戶要求生產特種顏色,采用310ml塑料膠管、400ml軟包裝、5加侖塑料桶和55加侖鐵桶包裝。 White, white available, customer tailored, in 310-ml 400ml, 5 or 55 gallon cartridges.
儲存及有效期Storage shelf life 屬于非危險品,請儲存于溫度在27℃以下的陰涼干燥處,有效期為12個月 It has 12 months usable life from the date of manufacture. Stored under cool and dry place.